Swing/Slide Wear Mats
Reduce maintenance in high-traffic areas • Easy to install
APS-Swing/Slide WearMat
-
-
- 40″ x 40″ x 1.5″
- Beveled edges
- 64 lbs.
- Waffle bottom construction
-
APS-SwingMat
-
-
- 3′ x 5′ x 2″
- Beveled edges
- 115 lbs.
- Waffle bottom construction
-
APS-WearMat-8x4x2
-
-
- 8′ x 4′ x 2″
- 2 interlocking halves
-
APS-ResidentialWearMat
APS-ResidentialWearMat
As recommended by the CPSC Public Playground Safety Handbook 2.4.2.2 Loose Fill Surfacing Materials
2. Loose-fill surfacing requires frequent maintenance to ensure surfacing levels never drop below the minimum depth. Areas under swings and at slide exits are more susceptible to displacement; special attention must be paid to maintenance in these areas. Additionally, wear mats can be installed in these areas to reduce displacement.
As recommended by the CPSC Public Playground Safety Handbook 2.4.2.2 Loose Fill Surfacing Materials
2. Loose-fill surfacing requires frequent maintenance to ensure surfacing levels never drop below the minimum depth. Areas under swings and at slide exits are more susceptible to displacement; special attention must be paid to maintenance in these areas. Additionally, wear mats can be installed in these areas to reduce displacement.
Spinner Wear Mats
Action Play Systems offers a full line of wear mats for additional high-traffic areas of your playgrounds. Designed to reduce wear patterns around modern spinners or rotating equipment, we offer 5 uniquely sized mats to work with most equipment on the market today.
APS Wear Mats are perfect for today’s spinning equipment!
But don’t take our word for it!
“We ordered a spinner mat and installed it in early December…These are perfect for the Burke Comet Spinner. Kathy and I have installed them for customers and they fit good and protect the turf from wearing through. The all thread works really good. This is by far the best mat on the market for a spinner the size of the Comet.
We are going to start quoting these with all orders that have a spinner on them. We constantly get maintenance calls about the wood fiber being trenched out or the turf wearing through. This is an easy solution to an ongoing maintenance problem.”
APS-SpinnerWearMat
-
-
- 48″ diameter
- 6″ center opening
- 2″-thick, beveled edges around the perimeter
- 110 lbs.
-
APS-WearMat-6′
-
-
- 2-piece wear mat
- 6′ diameter
- 6″ center opening with 6″ plug for a uniform mat
- 2″-thick beveled edges around the perimeter
- 235 lbs.
-
APS-WearMat-8′
-
-
- 4-piece wear mat
- 8′ diameter
- 6″ center opening with 6″ plug for a uniform mat
- 2″-thick beveled edges around the perimeter
- 355 lbs.
-
APS-WearMat-10′
-
-
- 8-piece wear mat
- 10′ diameter
- 4′ center opening with 3′ radius wear mat
- 2″-thick beveled edges around the perimeter
- 575 lbs.
-
APS-WearMat-10′
-
-
- 8-piece wear mat
- 10′ diameter
- 4′ center opening with 3′ radius wear mat
- 2″-thick beveled edges around the perimeter
- 575 lbs.
-
APS-WearMat-14′
-
-
- 16-piece wear mat
- 14′ diameter
- 6′ center opening, 4′ radius wear mat
- 2″-thick beveled edges around the perimeter
- 1,075 lbs.
-
APS-WearMat-14′
-
-
- 16-piece wear mat
- 14′ diameter
- 6′ center opening, 4′ radius wear mat
- 2″-thick beveled edges around the perimeter
- 1,075 lbs.
-